Knowby
Brake 13 – Alarms and faults
Press brake category. What to do when the controller shows an alarm. [REVIEW: general practice; add our common alarms]
Press brake category. What to do when the controller shows an alarm. [REVIEW: general practice; add our common alarms]
1
Step 1 of 6
<p>Stop. Take your foot off the pedal and read the alarm text on the controller.</p>

Stop. Take your foot off the pedal and read the alarm text on the controller.

2
Step 2 of 6
<p>Light curtain or guard alarm: check nothing is blocking the beam, then reset.</p>

Light curtain or guard alarm: check nothing is blocking the beam, then reset.

3
Step 3 of 6
<p>E-stop pressed: twist to release it, then reset on the controller.</p>

E-stop pressed: twist to release it, then reset on the controller.

4
Step 4 of 6
<p>Back gauge alarm: check nothing is blocking the fingers, then home the back gauge.</p>

Back gauge alarm: check nothing is blocking the fingers, then home the back gauge.

5
Step 5 of 6

If the alarm comes back or you don't know what it means, tell the manager. Don't keep resetting.

6
Step 6 of 6

For service, call Laser Machines (contacts in Brake 00).