Knowby
Laser 19 – Cleaning the slats
Laser category. Knocking slag off the bed slats so sheets sit flat and the back of the parts stays clean.
Laser category. Knocking slag off the bed slats so sheets sit flat and the back of the parts stays clean.
1
Step 1 of 6
<p>Clean the slats every other week, and before cutting stainless or aluminium.</p>

Clean the slats every other week, and before cutting stainless or aluminium.

2
Step 2 of 6
<p>Park the head clear of the bed and turn the shutter off before you reach into the bed.</p>

Park the head clear of the bed and turn the shutter off before you reach into the bed.

3
Step 3 of 6
<p>Clear everything off the bed.</p>

Clear everything off the bed.

4
Step 4 of 6
<p>Knock the slag off each slat with the slat cleaner or a hammer, working along the slat.</p>

Knock the slag off each slat with the slat cleaner or a hammer, working along the slat.

5
Step 5 of 6

Check for bent or badly burnt slats. Replace them if the sheet won't sit flat (Laser 20).

6
Step 6 of 6

Empty the slag trolleys after a slat clean (Laser 21).