Knowby
Laser 02 – Loading a job / nest
HSG Laser > Production. Getting the right program from the office onto the laser and selecting its cutting parameters. HIGH IMPORTANCE: check grain direction before loading.
HSG Laser > Production. Getting the right program from the office onto the laser and selecting its cutting parameters. HIGH IMPORTANCE: check grain direction before loading.
1
Step 1 of 5

HIGH IMPORTANCE: check the nest's grain direction matches the drawing before you load it. See Laser 08.

2
Step 2 of 5
<p>The program comes from the office through the shared folder on SharePoint. Open the shared folder on the laser computer.</p>

The program comes from the office through the shared folder on SharePoint. Open the shared folder on the laser computer.

3
Step 3 of 5
<p>Find the program by its name. Check the name matches the job card: material, thickness and quantity.</p>

Find the program by its name. Check the name matches the job card: material, thickness and quantity.

4
Step 4 of 5
<p>Go to the material library and select the cutting parameters for the material, thickness and gas. See Laser 05.</p>

Go to the material library and select the cutting parameters for the material, thickness and gas. See Laser 05.

5
Step 5 of 5
<p>Check the grain runs lengthwise on the sheet and the parts in the nest line up with the grain shown on the drawing.</p>

Check the grain runs lengthwise on the sheet and the parts in the nest line up with the grain shown on the drawing.