Knowby
Wacker Neuson Wheeled Excavators – Operation
Operating instruction for Wacker Neuson wheeled excavators: PPE, start-up, pedals and oscillating axle lock, joystick functions, dozer blade and stabilisers, changing attachments and preparing for road travel. See the operating instructions for full details.
Operating instruction for Wacker Neuson wheeled excavators: PPE, start-up, pedals and oscillating axle lock, joystick functions, dozer blade and stabilisers, changing attachments and preparing for road travel. See the operating instructions for full details.
1
Step 1 of 26

Wear your PPE

Wear the personal protective equipment required for this machine at all times. This is for your own safety.

  • A helmet protects you from falling objects on site.

  • Suitable protective gloves prevent hand injuries.

  • Safety shoes with integrated steel toe caps protect your feet.

  • Safety glasses protect your eyes from flying particles.

  • Ear protection protects your ears and eardrums.

2
Step 2 of 26

Battery disconnect switch

The battery disconnect switch is always near the engine.

Turn the switch clockwise to make the machine ready for operation.

3
Step 3 of 26

Set up your workstation

Adjust the mirrors so that you always have a clear view, then set up your workstation.

4
Step 4 of 26

Fasten the seat belt

Do not operate the machine until the seat belt is properly fastened.

5
Step 5 of 26

Start the engine

  1. Turn the ignition key to start the engine.

  2. Only then fold down the joystick carrier with the red handle to make the machine ready for operation.

6
Step 6 of 26

Pedals

  • The accelerator pedal is on the right.

  • The brake pedal is next to it, on the left.

7
Step 7 of 26

Lock the oscillating axle

To lock the oscillating axle, press the brake pedal down fully until it engages.

This is only advisable in work mode.

8
Step 8 of 26

Release the axle lock

To release the lock, operate the small lever to the left of the brake pedal.

If the lever is operated before the brake pedal has engaged, the locking mechanism is deactivated and the oscillating axle is not locked when the brake pedal is applied.

9
Step 9 of 26

Road travel and work mode

  • The release must be deactivated for road travel. Do this by pivoting your foot slightly to the left.

  • To return to the work mode position, tap the lower part of the locking mechanism. This reactivates the locking function.

10
Step 10 of 26

Axle lock switch

When driving in work mode, the oscillating axle can also be locked and unlocked with the green safety toggle switch in the centre, in front of the steering wheel.

  • Unlocked, the machine adapts particularly well to uneven surfaces.

  • For greater stability during lifting operations, lock the oscillating axle with the foot pedal or the push button.

11
Step 11 of 26

Articulated boom

The optional articulated boom is operated with the left foot pedal.

12
Step 12 of 26

Right joystick: lifting arm and bucket

  • Move the joystick forward or backward to move the lifting arm towards you or away from you.

  • Move the joystick left or right to operate the bucket.

13
Step 13 of 26

Right joystick: swivel console and AUX 1

  1. Select swivel console operation with the left button on the joystick.

  2. Use the rocker switch on the joystick to swivel it to the left or right.

Here you can also select the AUX 1 auxiliary hydraulics and set it to suit your needs with the rocker switch.

14
Step 14 of 26

Cruise control

The right-hand button on the joystick operates the cruise control.

  • Press the button at the desired speed to activate it.

  • The rocker switch can also be used to adjust the speed while driving.

15
Step 15 of 26

Direction of travel

The toggle switch on the back of the joystick switches between forward, neutral and reverse.

16
Step 16 of 26

Left joystick: dipper stick and slewing

  • Move the joystick forward or backward to operate the dipper stick (arm).

  • Move it right or left to turn the cab in that direction.

17
Step 17 of 26

Left joystick: auxiliary hydraulics

  • Use the left button to switch between the auxiliary hydraulic connections: AUX 1 for the third control circuit and AUX 3 for Powertilt.

  • Then set the oil flow rate you need with the toggle switch.

18
Step 18 of 26

Left joystick: throttle, hammer and grapple

  • The button on the right side of the left joystick switches between hand throttle and idle speed.

  • The button on the back of the joystick operates a mounted hammer.

  • A mounted grapple is operated with the two rockers on the left and right joysticks.

19
Step 19 of 26

Road mode and work mode

The blue switch on the left joystick carrier switches between road mode and work mode.

20
Step 20 of 26

Dozer blade

Use the small lever on the right side of the operator's seat to move the dozer blade up or down.

Work only with the dozer blade lowered, to keep the machine stable. Raise it before moving the machine to a new location.

21
Step 21 of 26

Stabilisers and function keys

If the machine has stabilisers, activate them with the green keys.

  • F1 displays the operating states of the machine.

  • F2 switches between Eco and Power mode.

  • F3 operates the automatic speed control.

22
Step 22 of 26

Engine speed

The engine speed (rpm) can be adjusted by turning the knob.

If the knob is pressed by mistake, press it again to return to the speed setting.

23
Step 23 of 26

Release the bucket

Put the bucket down and unlock the mounting device:

  • manually, with the socket wrench, or

  • if the hydraulic quick coupler system is fitted, with the red circuit breaker and the red button to the right of it inside the machine.

Make absolutely sure that the safety bolts and the attachment lock into place and do not extend beyond it, so that the attachment cannot fall in an uncontrolled manner.

24
Step 24 of 26

Attach a tool

Hook the tool into the attachment and lock it:

  • manually, with the socket wrench, or

  • if the hydraulic attachment is fitted, with the safety switch in front of the left armrest.

25
Step 25 of 26

Position for road travel

  1. Raise the lifting arm to the maximum limit.

  2. Move the articulated boom and dipper stick to the position shown, so that the marker lines are horizontal. This maintains the specified visibility and clearance. Use the lines and triangles on the boom as a guide.

  3. Make sure the cab has been fixed with the centre bolt.

26
Step 26 of 26

Street mode

  • Switching to street mode deactivates the work hydraulics functions.

  • When driving at night or in fog, pay attention to the boom lighting and to any additional local regulations.

You will find detailed information in the operating instructions.