

Laser 16 – Upper protective window change
Category: HSG Laser > Maintenance. The upper window sits above the lower one and protects the optics. Check it when the lower window was very dirty or cutting is still poor after changing the lower window.
Category: HSG Laser > Maintenance. The upper window sits above the lower one and protects the optics. Check it when the lower window was very dirty or cutting is still poor after changing the lower window.
1
Step 1 of 4
The upper window is the window above the lower window. It has to be super clean, or it can wreck the laser.
2
Step 2 of 4
Check the upper window if the lower window was extra dirty when you changed it.
3
Step 3 of 4
The upper window is dirty if the laser still doesn't cut well after you've changed the lower window.
4
Step 4 of 4
Change it the same way as the lower window (Laser 15): wipe down the head, work on a clean surface, tape over the opening, and check there's a seal above and below the window. Everything must be very clean.