Turning On Salvagnini Laser

Knowby

Turning On Salvagnini Laser

This Standard Operating Procedure is to train operators in the correct and safe way of turning on the Salvagnini Laser PPE Required: • Safety Glasses • Hi-vis Clothing • Safety Boots • Safety Gloves • Ear Protection

This Standard Operating Procedure is to train operators in the correct and safe way of turning on the Salvagnini Laser PPE Required: • Safety Glasses • Hi-vis Clothing • Safety Boots • Safety Gloves • Ear Protection

1

Step 1 of 8

Clean floor and work area of any rubbish/tools

2

Step 2 of 8

Turn isolation switch on.

Note: If it is cold, the computer may not turn on straight away. In this case, leave isolator on for 10 minutes and switch it back off and on

3

Step 3 of 8

<p>a)    Enter password into login screen<br></p>

a) Enter password into login screen

4

Step 4 of 8

Choose the program folder required for the first job

5

Step 5 of 8

Ensure all light curtains and doors are closed.

Push blue alarm acknowledgement button

6

Step 6 of 8

Turn on Laser Source, Pointer, Lights and G100

7

Step 7 of 8

When prompted, reset the laser as shown

8

Step 8 of 8

If you are not prompted or an error occurs, manually reset the laser calibration