Knowby
Wacker Neuson RTSC3 Trench Roller – Start-Up and Operation
Start-up, remote control operation and shutdown of the Wacker Neuson RTSC3 trench roller, including what the machine's indicator lights mean. A supplement to the operator's manual, not a replacement for it.
Start-up, remote control operation and shutdown of the Wacker Neuson RTSC3 trench roller, including what the machine's indicator lights mean. A supplement to the operator's manual, not a replacement for it.
1
Step 1 of 17

Set the throttle to idle

Make sure the throttle is set to idle.

2
Step 2 of 17

Turn the key on

Turn the key to the ON position.

3
Step 3 of 17

Power on the controller

Press the power button on the controller.

4
Step 4 of 17

Wait for preheating

The lights indicate that the machine is preheating.

5
Step 5 of 17

Start the engine

Press and hold the engine start button on the controller.

6
Step 6 of 17

Switch the throttle to high

Switch the throttle to high.

7
Step 7 of 17

Fast blinking lights: too close

Fast blinking lights mean you are too close to the machine.

8
Step 8 of 17

Solid light: out of range

A solid light means you are out of range, or the controller has lost communication with the machine.

9
Step 9 of 17

Slow blinking lights: operating distance

Slow blinking lights mean you are within operating distance of the machine.

10
Step 10 of 17

Select low or high vibration

Use the controller to switch between low vibration and high vibration. The clip shows both.

11
Step 11 of 17

Drive forward and reverse

Controller functions: forward and reverse.

12
Step 12 of 17

Steer left and right

Controller functions: left and right.

13
Step 13 of 17

Keep line of sight

For site safety, the machine will stop if line of sight is broken.

14
Step 14 of 17

Set the throttle to idle

To shut down, set the throttle to idle.

15
Step 15 of 17

Power off the controller

Power off the controller. The engine will stop.

16
Step 16 of 17

Dock the controller

Put the controller back onto the charging dock.

17
Step 17 of 17

Remove the key

Turn the key to the OFF position and remove it.