How to Wrap a Pallet

Prepare the products of your warehouse for a safe transport by correctly filming your pallets. #packaging

Step 1 of 11

For more convenience, you can use the film distributor to hold and dispense the film without effort while you walk around the pallet.

Step 2 of 11

But you can also wrap the pallets with just the film roll.

Step 3 of 11

First

Secure your film by by either tying it to the wooden base or by wedging the end between two boxes on the pallet.

Step 4 of 11

You will want to start wrapping at the very bottom, being sure to cover at least 3 cm of the wooden pallet, if not more.

Step 5 of 11

This secures the product to the base so it doesn't slide or tip off.

This is the most important part of wrapping your pallet.

Step 6 of 11

Then wrap around the base at least twice. And for heavier loads, you can go around 4 or 5 times for even more stability.

Step 7 of 11

While wrapping, hold the film at about 25 cm from your pallet and walk forward.

Step 8 of 11

To stretch your pallet film, stretch the film for 30 to 50% around the corners, being sure to hold tension in the film to give it a tight secure wrap

Step 9 of 11

When moving up, you will want to have at least 50% overlap from one layer to the next for added strength.

Step 10 of 11

Once you reach the top, stretch the film around the top corners and pull slightly downwards so you secure about 3 cm of film over the top of your pallet corners.

Step 11 of 11

Now that your pallet is securely wrapped, you can count on the safe transportation of your products.