Knowby
Wacker Neuson RC110 Roller – Start-Up and Vibration Modes
How to start up and run the Wacker Neuson RC110 pro roller, and how to use its manual and automatic vibration modes.
How to start up and run the Wacker Neuson RC110 pro roller, and how to use its manual and automatic vibration modes.
1
Step 1 of 17

Enter the cab

Enter the cab, always maintaining three points of contact, and fasten your safety belt.

2
Step 2 of 17

Set the drive lever to park

Make sure the drive lever is set to park.

3
Step 3 of 17

Key the roller on

Key the roller on and start up.

4
Step 4 of 17

Select manual vibration

With the RC110 you can use either manual or automatic vibration modes.

For manual vibration, press the vibration button on the control panel. The "Manual" light will turn on.

5
Step 5 of 17

Switch between large and small vibration

You can also alternate between large and small vibration using the frequency selection button.

6
Step 6 of 17

Set the engine speed

Set your engine speed to MAX or ECO.

7
Step 7 of 17

Sound the horn

Sound the horn to let people know you are about to start working.

8
Step 8 of 17

Move the drive lever to neutral

Move the drive lever from park to neutral.

9
Step 9 of 17

Start vibration

Press the vibration button on the drive lever to turn on the vibration.

10
Step 10 of 17

Set the travel speed

Use the hand wheel to change your travel speed.

  • Turning it forward increases your speed.

  • Turning it backward decreases your speed.

11
Step 11 of 17

Begin travel

Move the lever forward or reverse to begin travel.

Adjust the travel speed with the drive lever forward to find the correct speed for compaction. Switch between large and small vibration if necessary.

12
Step 12 of 17

Stop vibration and park

When you have finished, press the vibration button on the drive lever to turn vibration off, then put the machine in park.

13
Step 13 of 17

Select automatic vibration

To put the RC110 in automatic vibration mode, push the automatic vibration button on the control panel. The "Auto" light will turn on.

14
Step 14 of 17

Neutral and vibration on

  1. Move the drive lever to neutral.

  2. Push the vibration button on the drive lever to turn on vibration.

15
Step 15 of 17

Set the travel speed in automatic mode

Use the hand wheel to change your travel speed. Turning it forward increases your speed and turning it backward decreases it.

16
Step 16 of 17

How automatic vibration works

Automatic vibration starts when speed exceeds 0.9 mph (about 1.4 km/h) and turns off automatically once speed drops below 0.6 mph (about 1 km/h).

17
Step 17 of 17

Stop automatic vibration and park

When you have finished, press the vibration button on the drive lever to turn the vibration off, and put the machine in park.