Attach auger to vehicle

Knowby

Attach auger to vehicle

1

Step 1 of 15

Make sure Auger is EMPTY. To do this start and run to make sure no product is in the auger.

2

Step 2 of 15

<p>Turn lever in antticlockwise until the pressure is fully released off cable</p>

Turn lever in antticlockwise until the pressure is fully released off cable

3

Step 3 of 15

<p>Take drawbar off it’s holder on auger</p>

Take drawbar off it’s holder on auger

4

Step 4 of 15

<p>Put drawbar at base of auger - ensure it is secured with pin</p>

Put drawbar at base of auger - ensure it is secured with pin

5

Step 5 of 15

<p>Put auger onto vehicle</p>

Put auger onto vehicle

6

Step 6 of 15

<p>Turn this lever anticlockwise until cable is very loose</p>

Turn this lever anticlockwise until cable is very loose

7

Step 7 of 15

<p>Unhook cable off rear axle unit</p>

Unhook cable off rear axle unit

8

Step 8 of 15

<p>Put cables around top pulley</p>

Put cables around top pulley

9

Step 9 of 15

<p>Hook cable around latch midway between front and back wheels</p>

Hook cable around latch midway between front and back wheels

10

Step 10 of 15

<p>Tighten ratchet and watch to ensure cable is moving freely around cables</p>

Tighten ratchet and watch to ensure cable is moving freely around cables

11

Step 11 of 15

<p>Wind ratchet clockwise until third wheel has risen to chain. Latch chain onto hook</p>

Wind ratchet clockwise until third wheel has risen to chain. Latch chain onto hook

12

Step 12 of 15

<p>Unwind ratchet until slack is taken out of chain</p>

Unwind ratchet until slack is taken out of chain

13

Step 13 of 15

<p>Put hopper bin on back of vehicle</p>

Put hopper bin on back of vehicle

14

Step 14 of 15

<p>Before you leave ensure all latches and pins are secure and check tyre pressures.</p>

Before you leave ensure all latches and pins are secure and check tyre pressures.

15

Step 15 of 15

<p>Drive slowly and safely watching for overhead lines</p>

Drive slowly and safely watching for overhead lines