What to do when there’s not enough water in tanks

Knowby

What to do when there’s not enough water in tanks

1

Step 1 of 13

<p>Go to tanks outside dairy</p>

Go to tanks outside dairy

2

Step 2 of 13

<p>Go to the tap inlets at back of the back tank</p>

Go to the tap inlets at back of the back tank

3

Step 3 of 13

<p>Make sure the red tap is in the open position, as currently shown.</p>

Make sure the red tap is in the open position, as currently shown.

4

Step 4 of 13

<p>Open the blue tap below that is marked stock water</p>

Open the blue tap below that is marked stock water

5

Step 5 of 13

<p>Report on WhatsApp if either of the taps aren’t filling the tank.</p>

Report on WhatsApp if either of the taps aren’t filling the tank.

6

Step 6 of 13

<p>If there is no water coming out of the blue painted line go to the pump shed on the channel on green rises road</p>

If there is no water coming out of the blue painted line go to the pump shed on the channel on green rises road

7

Step 7 of 13

Jump over the pipes to get to the pump at the back of the shed

8

Step 8 of 13

<p>Look at the digital read out that faces the back wall 🤦🏽‍♂️</p>

Look at the digital read out that faces the back wall 🤦🏽‍♂️

9

Step 9 of 13

Ensure that the read out is green and that the top right hand reading is above 4. If it is red press the ‘Run’ button and the screen should turn green

10

Step 10 of 13

If there is no water coming from pipe that is going directly into the ground go to pump shed under dam. On green rises road

11

Step 11 of 13

Ensure that the stock water pump is running which is pump furthest from door

12

Step 12 of 13

<p>If it isn’t running check the VSD on the back wall and you may need to press reset</p>

If it isn’t running check the VSD on the back wall and you may need to press reset

13

Step 13 of 13

Go back to tanks to check water flow from both taps