Knowby
Brake 12 – Daily and weekly checks
Press brake category. Quick checks before use and routine care. [REVIEW: frequencies are general practice; check the machine manual]
Press brake category. Quick checks before use and routine care. [REVIEW: frequencies are general practice; check the machine manual]
1
Step 1 of 6
<p>Daily: test the laser guard before the first bend. Put a block in the guard and check the beam stops.</p>

Daily: test the laser guard before the first bend. Put a block in the guard and check the beam stops.

2
Step 2 of 6
<p>Daily: test the E-stops and check the foot pedal works and isn&#39;t damaged.</p>

Daily: test the E-stops and check the foot pedal works and isn't damaged.

3
Step 3 of 6

Daily: check the hydraulic oil level in the sight glass.

4
Step 4 of 6
<p>After each job: clean the tooling and wipe it with oil before putting it back on the rack.</p>

After each job: clean the tooling and wipe it with oil before putting it back on the rack.

5
Step 5 of 6
<p>Weekly: wipe down the beam, the clamps and the back gauge fingers, and check for oil leaks.</p>

Weekly: wipe down the beam, the clamps and the back gauge fingers, and check for oil leaks.

6
Step 6 of 6

Report any fault to the manager and tag the machine out if it's unsafe.