

Wear your PPE
Wear the personal protective equipment required for this machine at all times. This is for your own safety.
A helmet protects you from falling objects on site.
Suitable protective gloves prevent hand injuries.
Safety shoes with integrated steel toe caps protect your feet.
Safety glasses protect your eyes from injury.
Ear protection protects your ears and eardrums.
The EZ17e at a glance
The all-electric EZ17e mini excavator gives you the same performance as a conventional machine and is easy to operate.
Battery disconnect switch
Rotate the battery disconnect switch to the horizontal position to make the machine ready for operation.
Charging
The charging cable plugs in on the right side of the machine.
The machine can be charged directly from a 16-amp power connection, or from a standard 230-volt Schuko socket using the supplied adapter cable.
Start the machine
Insert the key and turn it.
Make sure the left joystick carrier is folded up.
Machine display
The machine display shows all the important information, such as the remaining running time and machine data.
Fold down the joystick carrier
About 10 seconds after switching on the ignition, you will hear a soft click. You can then fold down the joystick carrier.
Eco and Power mode
The buttons for switching between Eco and Power mode are behind the right joystick. Press the Eco/Power button to choose between the two modes.
In Power mode, the speed can be increased up to 2,200 rpm.
Settings
On the machine display you can adjust all other settings, adapt the machine to your needs and view additional information.
Charging progress
While charging, the machine display shows the progress and the remaining time until fully charged.
Charging while working
The EZ17e can also be charged from the wall socket while it is working.
This is only permitted for stationary work.
You will find full details in the operator's manual.