

What the inch brake pedal does
All Wacker Neuson articulated wheel loaders have an inch brake pedal.
It diverts hydraulic power from the wheels to the boom and bucket.
Press both pedals fully
Fully press the inch brake pedal with your left foot.
Fully press the throttle with your right foot.
The machine is now at full power.
Select forward gear
Put the machine in forward gear.
With full throttle, the inch brake fully pressed and forward gear selected, all hydraulic power is at the boom and bucket and none of it is at the wheels.
Ease off the inch brake to creep forward
Slowly come off the inch brake pedal to send some of the power to the wheels.
The machine barely creeps forward, so you can easily creep up to a truck, a hopper or whatever you are loading.
Keep power at the bucket while inching
While the machine moves forward, plenty of power still goes to the bucket and boom.
This is how to cycle fast and inch up to something.
Come further off the pedal to speed up
As you come further off the inch brake pedal, the machine speeds up.
Stay on full throttle the whole time. You are just putting power where you need it, when you need it, to drive into the pile.
Press harder in the pile
When you get into the pile, press the inch brake a little harder.
This diverts power to the boom and bucket.
See the cycle speed at full power
Under full power with the inch brake in use, the machine cycles a load quickly.
Do not drive with one foot
Without the inch brake, at about a third throttle (around 1,400 rpm), you are not using the power that could be going to the front end of the machine.
This machine is meant to be driven with two feet.