

Laser 17 – Ceramic ring change
Category: HSG Laser > Maintenance. When to change the ceramic ring on the cutting head, how to fit it, and the height calibration needed afterwards.
Category: HSG Laser > Maintenance. When to change the ceramic ring on the cutting head, how to fit it, and the height calibration needed afterwards.
1
Step 1 of 4
Change the ceramic ring if the nozzle won't tighten.
2
Step 2 of 4
Take the nut off the bottom of the head to remove the ceramic.
3
Step 3 of 4
Fit the new ceramic and make sure the pins line up. Spare ceramic: laser ceramic body D31 H13.5.
4
Step 4 of 4
Do a height calibration afterwards (Laser 12).