Knowby
Brake 02 – Shutdown and end of shift
Press brake category. Shutting down the HG-170-3200 at the end of the day. [REVIEW: general practice]
Press brake category. Shutting down the HG-170-3200 at the end of the day. [REVIEW: general practice]
1
Step 1 of 5
<p>Lower the top beam onto a block or the die so it isn&#39;t left raised with tooling loaded.</p>

Lower the top beam onto a block or the die so it isn't left raised with tooling loaded.

2
Step 2 of 5
<p>Take off any special tooling and put it back on the rack, clean and oiled (Brake 12).</p>

Take off any special tooling and put it back on the rack, clean and oiled (Brake 12).

3
Step 3 of 5
<p>Close the program and shut down the controller.</p>

Close the program and shut down the controller.

4
Step 4 of 5
<p>Turn off the main isolator (Brake 01, step 1).</p>

Turn off the main isolator (Brake 01, step 1).

5
Step 5 of 5
<p>Clear the bed and the area around the machine, and put finished parts on the stillage.</p>

Clear the bed and the area around the machine, and put finished parts on the stillage.