Turning on the glasswasher:

• Place the circular filter into the designated space inside glasswasher

• Position the long thin secondary filter on top of first filter, ensuring the thicker edge is facing the back of the glasswasher

• Hold power button until the “START” button turns green

Operating dishwasher

• When opening the door, ensure you open the door slowly to help the steam disperse slowly.

• When removing the rack from the machine, tilt pull the rack halfway out, and then tilt the rack from the front. This will allow excess water to run from the rack, back into the machine. This will help prevent the excess water dripping onto the floor.

• Close the door, and the START button will be illuminated green once it is heated ready for another cycle.

Cleaning the machine:

• Remove any racks of glasses

• Press and hold the draining button for 3 seconds

• Once the machine has drained, open the machine and remove filters. Rinse under the tap and leave long filter in sink overnight to dry.

• Once the water has drained, press the START button to commence the self-cleaning function.

• Once this function has finished, open the door and use circular filter to prop door semi open to air out the machine overnight. Give the outside of the machine a final wipe down and sanitize.