Knowby
Brake 07 – Creating a new manual program (Delem DA-66S)
Category: Ragos Press Brake > Programming (DA-66S). Writing a quick manual program for a simple one-off fold, in the order the values are entered.
Category: Ragos Press Brake > Programming (DA-66S). Writing a quick manual program for a simple one-off fold, in the order the values are entered.
1
Step 1 of 12
<p>Use a manual program when the part is easy, like a one-time fold. For parts you&#39;ll bend again, make an auto program (Brake 08).</p>

Use a manual program when the part is easy, like a one-time fold. For parts you'll bend again, make an auto program (Brake 08).

2
Step 2 of 12
<p>Enter the bending length.</p>

Enter the bending length.

3
Step 3 of 12

Enter the angle.

4
Step 4 of 12

Enter the material thickness.

5
Step 5 of 12
<p>Select the punch and die.</p>

Select the punch and die.

6
Step 6 of 12

Enter the X axis (backgauge position).

7
Step 7 of 12

Enter Z1 and Z2 (backgauge finger positions).

8
Step 8 of 12

Enter the deflection (crowning).

9
Step 9 of 12

Enter the corrections: A1 and A2 for angle, Y1 and Y2 for the beam.

10
Step 10 of 12
<p>For each bend, set the X axis, Z axis and opening.</p>

For each bend, set the X axis, Z axis and opening.

11
Step 11 of 12

Manual programs are not saved.

12
Step 12 of 12

Test the program on a small piece of scrap of the same thickness before you bend the job.