Knowby
Wacker Neuson Vibratory Plates – Operation
Operating Wacker Neuson reversible vibratory plates: PPE, setting the drawbar, starting and warm-up, vibration, speed and direction, standby and switching off, emergency stop, transport and remote control models. Always follow the operator's manual.
Operating Wacker Neuson reversible vibratory plates: PPE, setting the drawbar, starting and warm-up, vibration, speed and direction, standby and switching off, emergency stop, transport and remote control models. Always follow the operator's manual.
1
Step 1 of 14

Wear your PPE

Wear the personal protective equipment required for this machine at all times. This is for your own safety.

  • Safety shoes with integrated steel toe caps to protect your feet

  • Ear protection

  • Hard hat: protects from falling objects on the construction site

  • Protective gloves: prevent injuries to the hands

  • Safety glasses: help prevent injury from flying particles

  • Safety vest: keeps you highly visible on the job site

2
Step 2 of 14

Set up the drawbar

Before starting the vibratory plate, move the drawbar into the correct position.

  • Turn the star knob to set the drawbar height to a comfortable working position.

  • The drawbar kick lock releases the drawbar from the transport position.

3
Step 3 of 14

Switch on

  1. Open the protective hood.

  2. Press the on/off switch.

4
Step 4 of 14

Start the machine

Press the switch for vibration and then the black knob with the start symbol.

This engages the warm-up phase. Depending on the ambient temperature, this may take several minutes.

5
Step 5 of 14

Start the vibration

As soon as the vibratory plate changes to idle speed, start the vibration by pulling out the black knob with the vibration symbol.

6
Step 6 of 14

Control speed and direction

Control the speed and travel direction with the control handle.

  • Tilt it forward to drive forward.

  • Pull it backward to reverse.

7
Step 7 of 14

Lower the drawbar in tight spaces

When space is limited, such as when manoeuvring under sheeting and bracing, press the star knob to lower the drawbar.

Pull the drawbar up and it returns to its individually set working height.

8
Step 8 of 14

Switch to standby

To switch the vibratory plate off temporarily, press the black knob on the operating panel of the drawbar.

The vibratory plate is now in standby mode.

9
Step 9 of 14

Switch off completely

  1. Open the protective hood.

  2. Press the on/off switch.

As soon as the indicator lights go off, the machine is completely switched off.

After 15 minutes in standby mode, the machine shuts down automatically.

10
Step 10 of 14

If you let go of the handle

If you let go of the control handle during operation, the handle automatically moves to the neutral position and the machine goes into standing vibration.

11
Step 11 of 14

Emergency stop

The emergency stop switch is used solely to switch off the machine in case of danger.

Activating it switches the machine off immediately.

Operation can only be resumed after unlocking the emergency stop switch.

12
Step 12 of 14

Lock the drawbar for transport

During transport, the drawbar must be locked in a vertical position.

13
Step 13 of 14

Remote control models

Remote control models can also be operated with the remote control.

  1. The red knob activates the remote control.

  2. Press the starter button to start the vibratory plate.

  3. Use the joystick to steer forward, backward, right and left.

14
Step 14 of 14

Keep your distance

If the infrared connection between the remote control and the vibratory plate is broken, the plate switches to standing vibration. This also happens when you come too close to the plate.

Keep a minimum distance of 2 metres from the machine.

You will find detailed information in the operator's manual.