Place doors in position allowing dog box to be dropped in place

Fasten the front of the dog box and divider together using M6x16 stainless steel button heads and antiseize

Tighten the adjustable mounting brackets to the center and rear dividers

Ensure the brackets are level with the floor when tightened

Secure mounting clamps in place try to have clamps in each corner to ensure a good clamping surface.

Drill through the wellside using the 2x M8 holes in the center divider

Drill holes through the wellside using the M8 holes in the rear doors/divider.

Fasten all drilled holres using M8x25 Bolts and flanged M8 Nuts

Clean out wellside

Insert rubber mats

Clean out again once complete