Knowby
Laser 05 – Loading saved cutting parameters (incl. etching)
HSG Laser > Production. Selecting the saved parameter set for a job and setting up etching.
HSG Laser > Production. Selecting the saved parameter set for a job and setting up etching.
1
Step 1 of 3

Open the material library and pick the set for the job's cutting gas, then thickness. See Laser 04.

2
Step 2 of 3
<p>Before cutting, check with your eyes that the material, thickness and gas match the job card. Then double check again.</p>

Before cutting, check with your eyes that the material, thickness and gas match the job card. Then double check again.

3
Step 3 of 3

Etching is set by colour: anything to be etched is on the blue colour. Make sure the etching file is saved to blue so it etches and doesn't cut through.