Knowby
Hot Melt Glue Gun Use
Approved by: Vien Pham (Operations Manager), Con Leonidas (HSR), Sean Manser (2IC), Joshua Black (OHS Manager)
Approved by: Vien Pham (Operations Manager), Con Leonidas (HSR), Sean Manser (2IC), Joshua Black (OHS Manager)
1
Step 1 of 6
<p>Turn on Glue Gun and allow to heatup, this will take several minutes dependent on ambient temperature.</p>

Turn on Glue Gun and allow to heatup, this will take several minutes dependent on ambient temperature.

2
Step 2 of 6
<p>Beware the tip/nozzle of the gun will get extremely hot!!&nbsp;</p>

Beware the tip/nozzle of the gun will get extremely hot!! 

3
Step 3 of 6
<p>Insert glue stick from the end. (Once glue gun has reached temp)</p>

Insert glue stick from the end. (Once glue gun has reached temp)

4
Step 4 of 6
<p>Hold rubber near hot end. Apply appropriate amount of glue for size of rubber. </p><p>Beware of the nozzle and glue it is extremely hot!!</p>

Hold rubber near hot end. Apply appropriate amount of glue for size of rubber.

Beware of the nozzle and glue it is extremely hot!!

5
Step 5 of 6
<p>Press and hold rubber to the surface of the die (Time to hold dependent on ambient temperature, usually a couple of seconds).</p><p>Beware of the cutting rules on the die as they are very sharp.</p>

Press and hold rubber to the surface of the die (Time to hold dependent on ambient temperature, usually a couple of seconds).

Beware of the cutting rules on the die as they are very sharp.

6
Step 6 of 6
<p>When finished using, stand the glue gun on bench ensuring that the hot end is not touching anything.</p><p></p><p>Never lay the glue gun on its side.</p>

When finished using, stand the glue gun on bench ensuring that the hot end is not touching anything.

Never lay the glue gun on its side.