Fit Stainless Capping

Knowby

Fit Stainless Capping

Adding Stainless Capping protects the top of your Sideboards and Tailgate. This knowby was created by Bronco Built.

Adding Stainless Capping protects the top of your Sideboards and Tailgate. This knowby was created by Bronco Built.

1

Step 1 of 11

<p>Adding Stainless Capping protects the top of your Sideboards + Tailgate.</p>
<p>Time Required: 10-15 mins (Easy!)</p>
<p>Tools Required:
• 5mm Drill Bit
• Drill
• Rivet Tool</p>

Adding Stainless Capping protects the top of your Sideboards + Tailgate.

Time Required: 10-15 mins (Easy!)

Tools Required: • 5mm Drill Bit • Drill • Rivet Tool

2

Step 2 of 11

Will look like this when done

3

Step 3 of 11

<p>The supplied kit will have:
• 1 x Tailgate Piece
• 2 x Sideboard Pieces
• Stainless Steel Rivets</p>

The supplied kit will have: • 1 x Tailgate Piece • 2 x Sideboard Pieces • Stainless Steel Rivets

4

Step 4 of 11

Fit Capping to the Top of Sideboards + Tailgate (Sometimes you need to tap it on...)

5

Step 5 of 11

Peel off the protective plastic

6

Step 6 of 11

<p>There will be holes pre-cut in the stainless.</p>
<p>IMPORTANT: The holes go to the INSIDE, not the outside of the Tray.</p>
<p>From the outside, they will NOT be visible. We want a clean uncluttered look 😎</p>

There will be holes pre-cut in the stainless.

IMPORTANT: The holes go to the INSIDE, not the outside of the Tray.

From the outside, they will NOT be visible. We want a clean uncluttered look 😎

7

Step 7 of 11

Drill 5.0mm

8

Step 8 of 11

Install supplied Stainless rivets

9

Step 9 of 11

<p>Repeat for all other mounting holes</p>

Repeat for all other mounting holes

10

Step 10 of 11

IMPORTANT

Blow off any drill shavings

11

Step 11 of 11

Will look like this when done Done ✅