Knowby
Brake 00 – Ragos press brake overview and controls
Category: Ragos Press Brake > Reference. What the press brake is, its controller, tooling, safety system and crowning, and who to call for service.
Category: Ragos Press Brake > Reference. What the press brake is, its controller, tooling, safety system and crowning, and who to call for service.
1
Step 1 of 5
<p>This is our Ragos press brake, run from a Delem DA-66S controller. Model HG-170-3200: 170 tonnes (1700 kN), 3200 mm maximum bending length, 2700 mm between uprights, built December 2025, serial 2510170725.</p>

This is our Ragos press brake, run from a Delem DA-66S controller. Model HG-170-3200: 170 tonnes (1700 kN), 3200 mm maximum bending length, 2700 mm between uprights, built December 2025, serial 2510170725.

2
Step 2 of 5
<p>Tooling uses quick-release clamps. All top tools and bottom dies live on the tooling trolley.</p>

Tooling uses quick-release clamps. All top tools and bottom dies live on the tooling trolley.

3
Step 3 of 5
<p>The machine is guarded by a laser guard (DSP Laser-RX) in front of the tools. Keep your hands clear of the tools when bending. You bend with the foot pedal, which has its own red e-stop on top.</p>

The machine is guarded by a laser guard (DSP Laser-RX) in front of the tools. Keep your hands clear of the tools when bending. You bend with the foot pedal, which has its own red e-stop on top.

4
Step 4 of 5
<p>Crowning is CNC. On big parts you can adjust the deflection up to 4 degrees. If that&#39;s not enough, add a 1 mm shim by hand (Brake 10).</p>

Crowning is CNC. On big parts you can adjust the deflection up to 4 degrees. If that's not enough, add a 1 mm shim by hand (Brake 10).

5
Step 5 of 5
<p>For service, call Laser Machines Pty Ltd on 1300 561 963. Navjeet Singh, Service Manager: 0456 774 923. Ian Dowling, service: 0448 559 495.</p>

For service, call Laser Machines Pty Ltd on 1300 561 963. Navjeet Singh, Service Manager: 0456 774 923. Ian Dowling, service: 0448 559 495.