

Brake 03 – Choosing the right tooling
Category: Ragos Press Brake > Tooling. How to pick the V-die opening and punch for a job, and check the tonnage is safe.
Category: Ragos Press Brake > Tooling. How to pick the V-die opening and punch for a job, and check the tonnage is safe.
1
Step 1 of 3
Choose a V-die opening of 5 to 8 times the material thickness. Example: for 6 mm material, 6 x 5 = 30, so use the 32 mm die. Our multi-V bottom die is marked 86° with V openings of 16, 22, 35 and 50 mm.
2
Step 2 of 3
Pick the punch the job needs.
3
Step 3 of 3
Check the tonnage shown on the controller screen stays under the tool and machine limits.