

HIGH IMPORTANCE: wrong grain direction can make parts split on the back of the bend. It matters most on mild steel.
Check the job notes and the parts list. If grain direction is required it is specified there, and the manager has already set it in the CAM.

Load the sheet with the vacuum lifter (Laser 07). Film side up, checker plate face down, grain running lengthwise with the machine.

Lay the sheet as square as you can.

Manually jog the laser head to the corner where your home point is set.

Frame the nest and watch the red dot. It must stay on the sheet the whole time.
If the grain is unclear or the nest looks the wrong way, stop and ask the manager.
Parts aren't marked with grain after cutting, so the paperwork must show it for the press brake operator.